About this item

• 2oz Jar Water Based Graphite Conductive Paint
• For COPPER ELECTROFORMING- not electroplating other metals
• Thoroughly stir conductive paint from the bottom of the jar until smooth. Conductive particles will settle again within 8-12 hours, so stir well each time before using this paint
• Use with CORRECT type of ACID COPPER ELECTROFORMING Solution, uncoated cathode wire, copper anode, and proper power supply settings (0.1 amp per sq inch) for results
• Metering WET material will not read. Dry layers only
• If you are looking to "Electroplate 3D Prints", first electroform them in copper with the proper type of solution and conductive paint, and then you can electroplate them in other metals
• This condctive graphite paint is great to use for COPPER ELECTROFORMING of organic materials (leaves, acorns, insects, flowers, etc), 3D prints, glass, bone, wood, plastic, clay, resin, laser cut objects, and more! (basically, if you can paint it, you can electroform it!)
• Made by Makers for Makers: Electroforming Artists Enchanted Leaves Jewelry/Nedda Angelina & Electrical Engineer MircoDeanSystems/Mike Smith

Water Base Graphite Conductive Paint. Use to create your own copper electroformed creations. This quick drying paint is great to use for COPPER ELECTROFORMING of organic materials(leaves, acorns, insects, flowers, etc), 3D prints, glass, bone, wood, plastic, clay, resin, laser cut objects, and more! (basically, if you can paint it, you can electroform it!)
*PLEASE NOTE: This is different than the alcohol based graphite paint that I also offer*
If you are looking to "Electroplate 3D Prints", first electroform them in copper with the proper type of solution and conductive paint, and then you can electroplate them in other metals.
► ► ► ► ► ► ► ► ► ► ► ►

Graphite Conductive Paint COPPER ELECTROFORMING:
- Water based graphite conductive paint
2 oz jar
- Stir very well before each use, do not violently shake
- Brush, dip, or spray on
- Thins with Distilled Water (NOT tap or bottled)
- Wear protective gloves
- Apply 2 - 3 coats, 10 to 20 min between each coat of paint
- Use a sealant or lacquer before applying paint to organic and porous items
- 24 hour cure time
- Cleans with soap and water

IMPORTANT USAGE NOTE:
► ► ► ► ► ► ► ► ► ► ► ►
Thoroughly stir conductive paint from the bottom of the jar until smooth.
Conductive particles will settle again within 8-12 hours, so stir well each time before using this paint.
Do not vortex or violently agitate/shake the paint jar, as air entrapment or foaming may cause separation.
► ► ► ► ► ► ► ► ► ► ► ►